Wheel Alignment: Inspection: Notes

Check the following items before performing the wheel alignment measurement.

• Tire inflation pressure
• Uneven wear of RH and LH tires, or difference of sizes
• Tire runout
• Excessive play and wear of ball joint
• Excessive play and wear of tie-rod end
• Excessive play of wheel bearing
• Right and left wheel base imbalance
• Deformation and excessive play of steering link
• Deformation and excessive play of suspension parts

Check, adjust and measure the wheel alignment in accordance with the following procedures.

1	Wheel arch height (front and rear wheels)	Inspection: Ref. to FRONT SUSPENSION>Wheel Alignment>INSPECTION>WHEEL ARCH HEIGHT .
?
2	Camber (front and rear wheels)	Inspection: Ref. to FRONT SUSPENSION>Wheel Alignment>INSPECTION>CAMBER . Adjustment: Ref. to FRONT SUSPENSION>Wheel Alignment>ADJUSTMENT>FRONT CAMBER .
?
3	Caster (front wheel)	Inspection: Ref. to FRONT SUSPENSION>Wheel Alignment>INSPECTION>CASTER .
?
4	Adjustment of difference between right and left steering angles	Inspection: Ref. to FRONT SUSPENSION>Wheel Alignment>INSPECTION>STEERING ANGLE . Adjustment: Ref. to FRONT SUSPENSION>Wheel Alignment>ADJUSTMENT>ADJUSTMENT OF DIFFERENCE BETWEEN RIGHT AND LEFT STEERING ANGLES .
?
5	Front wheel toe-in	Inspection: Ref. to FRONT SUSPENSION>Wheel Alignment>INSPECTION>FRONT WHEEL TOE-IN . Adjustment: Ref. to FRONT SUSPENSION>Wheel Alignment>ADJUSTMENT>FRONT WHEEL TOE-IN .
?
6	Rear wheel toe-in	Inspection: Ref. to FRONT SUSPENSION>Wheel Alignment>INSPECTION>WHEEL ARCH HEIGHT . Adjustment: Ref. to FRONT SUSPENSION>Wheel Alignment>ADJUSTMENT>REAR WHEEL TOE-IN .
?
7	Thrust angle	Inspection: Ref. to FRONT SUSPENSION>Wheel Alignment>INSPECTION>THRUST ANGLE . Adjustment: Ref. to FRONT SUSPENSION>Wheel Alignment>ADJUSTMENT>THRUST ANGLE .