Front Sub Switch
- Measure the resistance between terminals of the switch assembly power window front sub.
Preparation tool:
Circuit tester
- Passenger's seat sub
Terminal No. Inspection conditions Standard 6 - 5
6 - 7OFF Less than 1 Ω 2 - 5
2 - 6
2 - 71 MΩ or more 2 - 6
5 - 7Manual UP Less than 1 Ω 2 - 5
6 - 71 MΩ or more 2 - 6
6 - 1
5 - 7Auto UP Less than 1 Ω 2 - 5
6 - 71 MΩ or more 2 - 5
6 - 7Manual DOWN Less than 1 Ω 2 - 6
5 - 71 MΩ or more 2 - 5
5 - 1
6 - 7Auto DOWN Less than 1 Ω 2 - 6
5 - 71 MΩ or more
- Passenger's seat sub
- Replace the switch assembly power window front sub if the inspection result is not within the standard value.