Rear Exhaust Pipe: Installation
- Install the center exhaust cover.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Apply a coat of spray type lubricant to the mating area of cushion rubber, and install the rear exhaust pipe.NOTE: After installation, degrease the cushion rubber.
- Set a new gasket, and connect the center exhaust pipe (rear) and the rear exhaust pipe.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Install the muffler. Ref. to EXHAUST (H4DOTC)>MUFFLER>INSTALLATION .