Camshaft Position Sensor: Removal: Intake

RH SIDE.
1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>REMOVAL .
3. Disconnect the connector (A) and remove the camshaft position sensor.
Courtesy of SUBARU OF AMERICA, INC.
LH SIDE.
1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Disconnect the connector (A) and remove the camshaft position sensor.

Courtesy of SUBARU OF AMERICA, INC.