Engine Coolant Temperature Sensor: Installation

Set a new gasket, install the engine coolant temperature sensor using the ST.
NOTE: STRUT MOUNT SOCKET (20099PA000) can also be used.

Preparation tool:

ST: STRUT MOUNT SOCKET (20399AG000)

Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Connect the connector (B) to engine coolant temperature sensor and connect the connector (A) to the knock sensor.

Courtesy of SUBARU OF AMERICA, INC.
Install the connector (A) and clip (B).

Courtesy of SUBARU OF AMERICA, INC.
Install the clip (C), clip (D) and clip (E), and connect connector (A) and connector (B).

Courtesy of SUBARU OF AMERICA, INC.
Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>INSTALLATION .
Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Fill engine coolant. Ref. to COOLING (H4DOTC)>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT .