Clear memory: Operation

On [Start] screen, select [Diagnosis].
On [Vehicle selection] screen, input the target vehicle information and select [OK].
On [Main Menu] screen, select [Each System].
On [Select System] screen, select the corresponding system and select [Enter].
On [Select Function] screen, select [DTC].
On [DTC] screen, select [Clear memory].
NOTE:
- For detailed operation procedures, refer to "Help" of application.
- Sub screen may appear in the system selection display. In that case, select appropriate items in accordance with the contents of the display.
- When the clear memory is performed, diagnostic code (DTC) and freeze frame data (FFD) necessary in diagnosis will also be deleted.
- Before performing the clear memory, be sure to save the diagnostic code (DTC) and freeze frame data (FFD) stored in the module.
- Initial diagnosis of electronic throttle control is performed after memory clearance.
  Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.