Clear At Learning Value

CAUTION: Be sure to perform the AT learning mode after performing Clear AT learning value.

On «Start» screen, select «Diagnosis».
On «Vehicle selection» screen, input the vehicle information and select «Confirmed».
On «Main Menu» screen, select «Each System».
On «Select System» screen, select «Transmission Control System».
On «Select Function» screen, select «Work Support».
On «Work Support» screen, select «Clear AT learning value».
Follow the messages displayed on the screen when working.
When «Clear completed. Turn IG_SW OFF. Perform AT learning again.» is displayed, Clear AT learning value is completed.