LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Primary Speed Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Speed Sensor: Inspection

  1. Remove the bulkhead wiring harness connector from TCM. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION CONTROL MODULE (TCM)>REMOVAL .
  2. Set the ST (CHECK BOARD) between the TCM and bulkhead wiring harness.
  3. Set the probe of oscilloscope to the check board connector.

    Terminals: 

    No. 14 (+) - No. 42 (-):

    G13200042Courtesy of SUBARU OF AMERICA, INC.
  4. Start and warm up the engine.
  5. Check the waveform of primary speed sensor with the engine idling.
    NOTE: The waveform cycle changes as the speed changes.
    G09482009Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals