LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Primary Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Speed Sensor: Removal

CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>REMOVAL .
  3. Clean the transmission exterior.
  4. Disconnect the primary speed sensor harness connector.
  5. Remove the primary speed sensor.
    CAUTION: After removing the sensors, plug the holes to avoid foreign materials intruding as necessary.
    G09482007Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals