LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Transmission Harness >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Harness: Inspection

  1. Visually check each harness and connector for damage or crack.
  2. Check each harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals and check the oil temperature sensor.
    NOTE: Refer to WIRING information for transmission harness terminal and oil temperature sensor terminal. Ref. to WIRING SYSTEM>CVT CONTROL SYSTEM>WIRING DIAGRAM .

    Harness continuity standard: 

    Less than 1 Ω

    Oil temperature sensor standard: 

    Approx. 2.6 kΩ (at 20°C)

scientia non olet · About LEMON Manuals