LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Transmission Harness >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Harness: Removal

  1. Remove the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>REMOVAL .
  2. Prepare for overhaul. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>PREPARATION FOR OVERHAUL .
  3. Disconnect the ground terminal of the transmission harness.
    G13200061Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the harness connector from the secondary speed sensor (A), front wheel speed sensor (B), primary speed sensor (C), secondary pressure sensor (D), inhibitor switch (E).
    G13200062Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the harness stay from the transmission harness connector and inhibitor harness connector.
  6. Remove the control valve body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>CONTROL VALVE BODY>REMOVAL .
  7. Remove the bolts to pull out the transmission harness bushing from the transmission case.
    G12452314Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the harness clip from the transmission body.
scientia non olet · About LEMON Manuals