Fuel Pump ASSY (FA20): Assembly
- Fuel pressure regulator installation
- Fuel pump installation
- Fuel sub tank installation
- Set the fuel suction plate on the fuel sub tank through the spring.
- Apply a coat of gasoline to a new O-ring and install it to the jet pump.
- Install the jet pump to the fuel sub tank.CAUTION:
- Install it so that the O-ring is not cut or pinched.
- Be sure to engage the claw.
- Engage the three claws and install the fuel filter to the fuel sub tank.
- Engage the claw and install the jet pump nozzle to the fuel sub tank.
- Install a new E-ring.
- Connect the fuel pump harness connector and install the harness to the four clamps.
- Set the fuel suction plate on the fuel sub tank through the spring.
- Fuel sender gauge ASSY installation (Refer to INSTALLATION )