Fuel Pump Control Computer (FA20): Installation
- Installation of fuel pump control computer ASSY
- Engage the bracket of fuel pump control computer ASSY to the body mounting hole and pass the stud bolt through the body hole.
- Install the fuel pump control computer ASSY with the nut.
Standard value: T=5.0Nm {51kgfcm} {3.7ftlbf}
CAUTION: If impact is applied to the fuel pump control computer ASSY, do not reuse it. - Connect the fuel pump control computer connector.
- Installation of luggage compartment trim side cover RH (Refer to INSTALLATION )
- Installation of luggage compartment trim cover INN RH (Refer to INSTALLATION )
- Installation of separate type rear seat cushion ASSY (Refer to ASSEMBLY )
- Installation of the front door scuff plate RH (Refer to INSTALLATION )
- Installation of the front door opening trim weather strip RH (Refer to INSTALLATION )
- Installation of battery ground terminal
Standard value: T=6.0Nm {61kgfcm} {4.4ftlbf}