MT Gear Shift Lever: Disassembly

NOTE: Disassembly is available only for 5MT model.

Remove the lock wires.

Courtesy of SUBARU OF AMERICA, INC.
Remove the rod from gear shift lever.

Courtesy of SUBARU OF AMERICA, INC.
Separate the rod and inner boot.
Remove the snap ring from the stay.

Courtesy of SUBARU OF AMERICA, INC.
Separate the gear shift lever and the stay.

Courtesy of SUBARU OF AMERICA, INC.
Remove the boot and bushing B from the gear shift lever.

Courtesy of SUBARU OF AMERICA, INC.
Remove the spring pin, and then remove the bushing and snap ring.

Courtesy of SUBARU OF AMERICA, INC.
Remove the boss from the joint.

Courtesy of SUBARU OF AMERICA, INC.
Remove the bushing and spacer from the boss.

Courtesy of SUBARU OF AMERICA, INC.
Remove the bushing and cushion rubber from the stay.

Courtesy of SUBARU OF AMERICA, INC.