Engine Oil Temperature Sensor: Removal
CAUTION:
If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.
- Disconnect the ground terminal from battery. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
- Disconnect the connector (A) from the engine oil temperature sensor, and remove the engine oil temperature sensor from the chain cover using the ST.
NOTE:
STRUT MOUNT SOCKET (20099 Pa000) can also be used.
Preparation tool:
ST: STRUT MOUNT SOCKET (20399AG000)