Impreza Model
- Install the fuel tank band bracket.
Tightening torque:
37 N.m (3.8 kgf-m, 27.3 ft-lb)
- Support the fuel tank with a transmission jack, set the fuel tank in place, and temporarily tighten the bolts of the fuel tank band.CAUTION: A helper is required to perform this work.
- Tighten the bolts of the fuel tank band in the order shown in the figure.
Tightening torque:
33 N.m (3.4 kgf-m, 24.3 ft-lb)
- Connect the fuel delivery tube to the fuel pipe assembly. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE A) .
- Connect the vent tube (A) to the canister. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE F) .
- Connect the circulate tube (B) to the fuel tank. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE D) .
- Connect the fuel filler hose to the fuel filler pipe assembly. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>FUEL FILLER HOSE CONNECTION .
- Install the rear differential.
T-type:
Refer to DIFFERENTIALS>REAR DIFFERENTIAL (T-TYPE)>INSTALLATION .
VA-type:
Refer to DIFFERENTIALS>REAR DIFFERENTIAL (VA-TYPE)>INSTALLATION .
- Install the rear exhaust pipe and muffler.
Rear exhaust pipe:
Refer to EXHAUST (H4DO (EXCEPT FOR HEV))>REAR EXHAUST PIPE>INSTALLATION .
Muffler:
Refer to EXHAUST (H4DO (EXCEPT FOR HEV))>Muffler>INSTALLATION .
- Install the fuel tank protector. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL TANK PROTECTOR>INSTALLATION .
- Lower the vehicle.
- Connect the connector to the fuel pump.
- Install the service hole cover of fuel pump.
- Install the rear seat cushion. Refer to SEATS>REAR SEAT>INSTALLATION .
- Connect the battery ground terminal. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .