Auto Start Stop DC/DC CONVERTER 2
- Attach the bracket.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the Auto Start Stop DC/DC converter 1 and the Auto Start Stop DC/DC converter 2.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Connect the connector to the Auto Start Stop DC/DC converter 1 and Auto Start Stop DC/DC converter 2, and install the clips.
- Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .