Stabilizer Bushing

1. Before installation, inspect the following items and replace any faulty part with a new one. Check the rubber bushing stabilizer front for abnormal cracks, fatigue or damage.
2. Install the rubber bushing stabilizer front.
3. Install the clamp stabilizer.

   Tightening torque:

   25 N.m (2.5 kgf-m, 18.4 ft-lb)

4. Install the front exhaust pipe. Ref. to EXHAUST (H4DO)>FRONT EXHAUST PIPE>INSTALLATION .
5. Install the under cover front.

Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)