Control Valve Body: Inspection
- Check for oil leaks.
- Check that there is no deformation, cracks or other damages.
- Measure the resistance of each solenoid, sensor and ground wire.NOTE: Measurement should be performed at a temperature of 20°C (68°F).
- Solenoid
Solenoid Terminal No. Standard Primary UP solenoid 2 - Control valve body 10 - 13.5 Ω Secondary solenoid 3 - Control valve body 5 - 7 Ω F&R clutch solenoid 4 - Control valve body 4 - 6 Ω Primary DOWN solenoid 7 - Control valve body 10 - 13.5 Ω Lock-up duty solenoid 9 - Control valve body 10 - 13.5 Ω AWD solenoid 10 - Control valve body 2 - 4.5 Ω - Sensor
Sensor Terminal No. Standard At 20°C (68°F) Oil temperature sensor 1 - 6 Approx. 2.5 kΩ - Ground
Terminal No. Standard 8 - Control valve body Less than 1 Ω
- Solenoid