| Oil pan seal cutter |
Used for removing oil pan. |
| Circuit tester |
Used for measuring resistance, voltage and current. |
| Thickness gauge |
Used for various inspections. |
| Caliper |
Used for measuring the dimension. |
| Spring scale |
Used for measuring the initial load of the drive pinion. |
| TORX® bit T70 |
Used for removing and installing the drain plug. |
| Push/pull gauge |
Used for measuring clutch clearance. |
| Angle gauge |
Used for installing the drive plate. |
| Dial gauge |
- Used for assembling the reverse brake and forward clutch.
- Used together with magnet stand.
|
| Magnet stand |
- Used for assembling the reverse brake and forward clutch.
- Used together with dial gauge.
|
| DST-i |
Used together with Subaru Select Monitor 4. |