Special Tool

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	398177700	INSTALLER	Used for installing the ball bearing of the transfer clutch and transmission case. Used for installing the taper roller bearing (front) outer race of drive pinion. Used for installing the drive pinion plug.
Courtesy of SUBARU OF AMERICA, INC.	398497701	SEAT	Used for removing and installing the side bearing inner race of the front differential.
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing the extension case oil seal. Used for removing the ball bearing of transmission case. Used together with CLAW (18760AA000) when removing the ball bearing of transmission case. Used for removing the taper roller bearing (front) outer race of drive pinion, and taper roller bearing (rear) outer race.
Courtesy of SUBARU OF AMERICA, INC.	398673600	COMPRESSOR	Used for removing and installing snap ring of forward clutch.
Courtesy of SUBARU OF AMERICA, INC.	399513600	INSTALLER	Used for removing the ball bearing of drive sprocket.
Courtesy of SUBARU OF AMERICA, INC.	498057300	OIL SEAL INSTALLER	Used for installing the extension case oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498077000	REMOVER	Used for removing the side bearing inner race of the front differential.
Courtesy of SUBARU OF AMERICA, INC.	498077300	REMOVER	Used for removing ball bearing of reduction driven gear.
Courtesy of SUBARU OF AMERICA, INC.	498077400	REMOVER	Used for removing the ball bearing of transfer driven gear.
Courtesy of SUBARU OF AMERICA, INC.	498077600	REMOVER	Used for removing the ball bearing of drive sprocket.
Courtesy of SUBARU OF AMERICA, INC.	498247001	MAGNET BASE	Used for adjusting backlash of the differential bevel gear and differential bevel pinion. Used for adjusting hypoid gear set backlash. Used together with DIAL GAUGE (498247100).
Courtesy of SUBARU OF AMERICA, INC.	498247100	DIAL GAUGE	Used for adjusting backlash of the differential bevel gear and differential bevel pinion. Used for adjusting hypoid gear set backlash. Used together with MAGNET BASE (498247001).
Courtesy of SUBARU OF AMERICA, INC.	498255400	PLATE	Used for adjusting hypoid gear set backlash.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for removing and installing transmission body.
Courtesy of SUBARU OF AMERICA, INC.	498497300	CRANKSHAFT STOPPER	Used for removing and installing the drive plate.
Courtesy of SUBARU OF AMERICA, INC.	498515500	REMOVER	Used for removing the taper roller bearing (front) inner race of the drive pinion and drive pinion shim.
Courtesy of SUBARU OF AMERICA, INC.	498575400	OIL PRESSURE GAUGE ASSY	Used for measuring the transfer clutch pressure.
Courtesy of SUBARU OF AMERICA, INC.	498897700	OIL PRESSURE ADAPTER SET	Used for measuring the secondary pressure (line pressure).
Courtesy of SUBARU OF AMERICA, INC.	498937110	HOLDER	Used for removing and installing the drive pinion lock nut. Used for adjusting drive pinion preload. Used for adjusting hypoid gear set backlash. Used together with ADAPTER (499787500). Used together with WRENCH (499787700).
Courtesy of SUBARU OF AMERICA, INC.	499267300	STOPPER PIN	Used for adjusting the inhibitor switch.
Courtesy of SUBARU OF AMERICA, INC.	499277100	BUSHING 1-2 INSTALLER	Used for installing the ball bearing of reduction driven gear. Used for installing the ball bearing of the transmission case. Used for installing the side bearing inner race of the front differential.
Courtesy of SUBARU OF AMERICA, INC.	499277200	INSTALLER	Used for installing the ball bearing of the transfer clutch.
Courtesy of SUBARU OF AMERICA, INC.	499575400	GAUGE	Used for measuring the end play.
Courtesy of SUBARU OF AMERICA, INC.	499575500	GAUGE	Used for measuring the end play.
Courtesy of SUBARU OF AMERICA, INC.	499575600	GAUGE	Used for measuring the end play.
Courtesy of SUBARU OF AMERICA, INC.	499755502	PRESS SNAP RING	Used for installing the drive sprocket ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	499755602	PRESS SNAP RING	Used for installing the drive pinion retainer plug.
Courtesy of SUBARU OF AMERICA, INC.	499757002	INSTALLER	Used for removing ball bearing of reduction driven gear. Used for installing the parking gear. Used for installing the transfer drive gear.
Courtesy of SUBARU OF AMERICA, INC.	499787500	ADAPTER	Used for removing and installing the drive pinion lock nut. Used for adjusting drive pinion preload. Used together with HOLDER (498937110). Used together with WRENCH (499787700).
Courtesy of SUBARU OF AMERICA, INC.	499787700	WRENCH	Used for removing and installing the drive pinion lock nut. Used for adjusting drive pinion preload. Used for adjusting hypoid gear set backlash. Used together with ADAPTER (499787500). Used together with HOLDER (498937110).
Courtesy of SUBARU OF AMERICA, INC.	499987003	SOCKET WRENCH (35)	Used for removing and installing the lock nut of reduction driven gear.
Courtesy of SUBARU OF AMERICA, INC.	899580100	INSTALLER	Used for installing the ball bearing of the transfer driven gear. Used for installing the taper roller bearing (front) inner race of drive pinion.
Courtesy of SUBARU OF AMERICA, INC.	899864100	REMOVER	Used for removing and installing the ball bearing of the transfer driven gear. Used for removing the parking gear and transfer drive gear. Used for removing the side bearing inner race of the front differential.
Courtesy of SUBARU OF AMERICA, INC.	899904100	STRAIGHT PIN REMOVER	Used for removing the spring pin of the differential case.
Courtesy of SUBARU OF AMERICA, INC.	927130000	EXTENSION DRIVE SHAFT	Used for installing the taper roller bearing (front) inner race of drive pinion.
Courtesy of SUBARU OF AMERICA, INC.	927720000	HOUSING BUSHING INSTALLER AND REMOVER	Used for installing drive pinion retainer oil seal. NOTE: Use BUSHING SHAFT (927880000). Used for installing the oil seal of the oil pump chain cover. NOTE: Use BUSHING SHAFT (927880000) and BASE TUBE LATERAL LINK (927890000).
Courtesy of SUBARU OF AMERICA, INC.	18270AA040	SOCKET	Used for removing and installing the test plug (transfer clutch pressure).
Courtesy of SUBARU OF AMERICA, INC.	18270KA020	SOCKET (E20)	Used for removing and installing the drive pinion retainer.
Courtesy of SUBARU OF AMERICA, INC.	18334AA000	PULLEY WRENCH PIN SET	Used for removing and installing the lock nut of reduction driven gear. Used together with PULLEY WRENCH (18355AA000).
Courtesy of SUBARU OF AMERICA, INC.	18355AA000	PULLEY WRENCH	Used for removing and installing the lock nut of reduction driven gear. Used together with PULLEY WRENCH PIN SET (18334AA000).
Courtesy of SUBARU OF AMERICA, INC.	18460AA040	CHECK BOARD	Used for measuring voltage and resistance of TCM terminals.
Courtesy of SUBARU OF AMERICA, INC.	18632AA000	STAND ASSY	Used for disassembling and assembling the transmission body.
Courtesy of SUBARU OF AMERICA, INC.	18657AA000	INSTALLER	Used for installing the transmission case oil seal.
Courtesy of SUBARU OF AMERICA, INC.	18658AA020	WRENCH COMPL RETAINER	Used for removing and installing the differential side retainer.
Courtesy of SUBARU OF AMERICA, INC.	18675AA000	DIFFERENTIAL SIDE OIL SEAL INSTALLER	Used for installing the differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	18681AA050	ADAPTER PRESSURE GAUGE	Used for measuring the transfer clutch pressure. Used together with OIL PRESSURE GAUGE ASSY (498575400). NOTE: Use the genuine union screw (part No. 801914010) and gasket (part No. 803914060) for installation.
Courtesy of SUBARU OF AMERICA, INC.	18681AA060	OIL PRESSURE GAUGE ADAPTER	Used for measuring the secondary pressure (line pressure). NOTE: Used together with the genuine O-ring (part No. 806908150).
Courtesy of SUBARU OF AMERICA, INC.	18723AA000	REMOVER	Used for removing the ball bearing of transfer clutch. Used together with BEARING REMOVER (18767AA010).
Courtesy of SUBARU OF AMERICA, INC.	18760AA000	CLAW	Used for removing the ball bearing of transmission case. Used together with PULLER ASSY (398527700).
Courtesy of SUBARU OF AMERICA, INC.	18761AA010	SHEET SPECIAL TOOL	Used for removing and installing valve cover.
Courtesy of SUBARU OF AMERICA, INC.	18762AA001	COMPRESSOR SPECIAL TOOL	Used for disassembling and assembling transfer clutch and reverse brake. COMPRESSOR SPECIAL TOOL (18762AA000) can also be used.
Courtesy of SUBARU OF AMERICA, INC.	18762AA010	COMPRESSOR SPECIAL TOOL	Used for removing and installing snap ring of forward clutch.
Courtesy of SUBARU OF AMERICA, INC.	18763AA000	COMPRESSOR SHAFT	Used for adjusting hypoid gear set backlash.
Courtesy of SUBARU OF AMERICA, INC.	18767AA010	BEARING REMOVER	Used for removing the ball bearing of transfer clutch. Used together with REMOVER (18723AA000).
Courtesy of SUBARU OF AMERICA, INC.	18769AA010	EXPANDER PULLEY	Used for removing and installing the secondary pulley.
Courtesy of SUBARU OF AMERICA, INC.	18801AA000	OIL PRESSURE GAUGE ASSY	Used for measuring the secondary pressure (line pressure).
Courtesy of SUBARU OF AMERICA, INC.	20099AE020	INSTALLER	Used for installing the taper roller bearing (rear) outer race of drive pinion.
Courtesy of SUBARU OF AMERICA, INC.	28499TC010	PRESS SNAP RING	Used for installing the ball bearing of the transmission case. Used for installing the taper roller bearing (front) outer race of drive pinion.
Courtesy of SUBARU OF AMERICA, INC.	41099AA012	ENGINE SUPPORT BRACKET	Used for removing and installing transmission body. Used together with ENGINE SUPPORT (41099AA020).
Courtesy of SUBARU OF AMERICA, INC.	41099AA020	ENGINE SUPPORT	Used for removing and installing transmission body. Used together with ENGINE SUPPORT BRACKET (41099AA012).
Courtesy of SUBARU OF AMERICA, INC.	73099SG000	SPECIAL TOOL CONDENSER	Used for installing the test plug (transfer clutch pressure).
Courtesy of SUBARU OF AMERICA, INC.	-	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures, refer to "Help" of application.