Intake Manifold: Assembly

Liquid gasket: 

THREE BOND 1105 (Part No. 004403010) or equivalent

Tightening torque: 

17 N.m (1.7 kgf-m, 12.5 ft-lb)

1. Install the purge control solenoid valve. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H6DO)>PURGE CONTROL SOLENOID VALVE>INSTALLATION .
2. Install the manifold absolute pressure sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H6DO)>Manifold Absolute Pressure Sensor>INSTALLATION .
3. Install the EGR pipe B. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H6DO)>EGR PIPE>INSTALLATION>EGR PIPE B .
4. Install the EGR control valve. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H6DO)>EGR CONTROL VALVE>INSTALLATION .
5. Install the engine harness to the intake manifold. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H6DO)>General Description>COMPONENT>ENGINE HARNESS .
6. Install the fuel pipe assembly, and install the fuel injector pipe and the fuel hose. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H6DO)>Fuel Delivery and Evaporation Lines>INSTALLATION>CONNECTING THE FUEL DELIVERY HOSE .

Tightening torque: 

T1: 1.25 N.m (0.1 kgf-m, 0.9 ft-lb)

T2: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 1: Engine Harness To Intake Manifold Bolts (With Torque Specification) (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Engine Harness To Intake Manifold Bolts (With Torque Specification) (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.