Without DTC

Detecting condition: 

• Defective combination meter
• Open circuit of harness

  Trouble symptom: 

• The STEERING warning light will not turn off.
• «No DTC» will be displayed on Subaru Select Monitor.

1. CHECK LAN SYSTEM. 

   Perform the diagnosis for LAN system using the Subaru Select Monitor. Refer to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .

   Is DTC U0131 detected?

   Yes  Perform the diagnosis according to DTC for LAN system. Refer to LAN SYSTEM (DIAGNOSTICS)>LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .

   No:  Go to  2.

2. CHECK COMBINATION METER. 

   Check the STEERING warning light when the ignition is turned from OFF to ON.

   Does the STEERING warning light illuminate at ignition switch ON, and turn off two seconds after the engine is started?

   Yes  Finish the diagnosis.

   No  Replace the combination meter. Refer to INSTRUMENTATION/DRIVER INFO>COMBINATION METER .