Inspection Mode Ab
| DTC | Item | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P0039 | TURBOCHARGER/SUPERCHARGER BYPASS VALVE "A" CONTROL CIRCUIT RANGE/PERFORMANCE | - | 2 |
| P0234 | TURBOCHARGER/SUPERCHARGER "A" OVERBOOST CONDITION | - | 2 |
| P0299 | TURBOCHARGER/SUPERCHARGER "A" UNDERBOOST CONDITION | - | 2 |
| P226B | TURBOCHARGER/SUPERCHARGER BOOST PRESSURE TOO HIGH - MECHANICAL | - | 1 |
WARNING:
When performing inspection mode AB on a public road, pay sufficient attention to the traffic condition and give the highest priority to safe driving.
NOTE:
Perform the inspection mode after warming up the engine except that the engine coolant temperature at engine start is specified.
- Using the Subaru Select Monitor, clear the memory of [Engine Control System]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Drive according to the drive pattern described below.
- Read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .