Steering Warning Light Does Not Go Off
Detecting condition:
- Defective combination meter
- Open circuit of harness
Trouble symptom:
When starting the engine, the STEERING warning light continues to illuminate.
- CHECK DTC.
Read the DTC of [Power Steering] using the Subaru Select Monitor, Ref. to POWER STEERING (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
Are any DTCs displayed?
Yes : Perform the diagnosis according to DTC. Ref. to POWER STEERING (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
No : Go to 2.
- CHECK LAN SYSTEM.
Check the LAN system. Ref. to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
Is the check result OK?
Yes : Go to 3.
No : Perform the diagnosis for LAN system.
- CHECK COMBINATION METER.
Check the combination meter, Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER SYSTEM>OPERATION>SELF-DIAGNOSIS DISPLAY MODE .
Is the check result OK?
Yes : Replace the steering box. Ref. to POWER ASSISTED SYSTEM (POWER STEERING)>ELECTRIC POWER STEERING GEARBOX .
No : Replace the combination meter, Ref. to O>COMBINATION METER .