LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Drive Plate >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Plate: Installation

  1. Temporarily install the drive plate and reinforcement drive plate.
  2. Set the ST in the position shown in the figure.

    Preparation tool: 

    ST: CRANKSHAFT STOPPER (498497300)

    G13200114Courtesy of SUBARU OF AMERICA, INC.
  3. Tighten the drive plate mounting bolt in two stages.
    NOTE: Fix the engine unit.
    1. Tighten the drive plate mounting bolt.

      Tightening torque: 

      30 N.m (3.1 kgf-m, 22.1 ft-lb)

    2. While checking the tightening angle with the angle gauge, tighten the drive plate mounting bolts to the specified angle.

      Tightening angle: 

      30° - 35°

      G10293263Courtesy of SUBARU OF AMERICA, INC.
  4. Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals