Special Tool

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	398177700	INSTALLER	Used for removing and installing the ball bearing and tapered roller bearing. Used for installing the parking gear.
Courtesy of SUBARU OF AMERICA, INC.	398497701	SEAT	Used for removing and installing the ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing the extension case oil seal. Used for removing the roller bearing of the primary pulley and secondary pulley. Used for removing the bearing of reduction driven gear. Used for removing the differential side retainer bearing outer race.
Courtesy of SUBARU OF AMERICA, INC.	398643600	GAUGE	Used for measuring the total end play, extension end play and drive pinion height.
Courtesy of SUBARU OF AMERICA, INC.	399513600	INSTALLER	Used to install the rear drive shaft ball bearing. Used for removing the ball bearing of drive sprocket.
Courtesy of SUBARU OF AMERICA, INC.	498057300	INSTALLER	Used for installing the extension case oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498077000	REMOVER	Used for removing ball bearing of front reduction drive gear. Used for removing the inner bearing inner race of the drive pinion. Used for removing the differential taper roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	498077600	REMOVER	Used for removing the ball bearing of the rear drive shaft. Used for removing the ball bearing of transfer reduction driven gear. Used for removing ball bearing of reduction driven gear. Used for removing the ball bearing of drive sprocket.
Courtesy of SUBARU OF AMERICA, INC.	498247001	MAGNET BASE	Used for measuring backlash. Used for measuring the clearance in forward clutch. Used with DIAL GAUGE (498247100).
Courtesy of SUBARU OF AMERICA, INC.	498247100	DIAL GAUGE	Used for measuring backlash. Used for measuring the clearance in forward clutch. Used with MAGNET BASE (498247001).
Courtesy of SUBARU OF AMERICA, INC.	498255400	PLATE	Used for measuring backlash.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for removing and installing transmission assembly. Used for preventing the torque converter from dropping off.
Courtesy of SUBARU OF AMERICA, INC.	498497300	CRANKSHAFT STOPPER	Used for removing and installing the drive plate.
Courtesy of SUBARU OF AMERICA, INC.	498575400	OIL PRESSURE GAUGE ASSY	Used for measuring the transfer clutch pressure.
Courtesy of SUBARU OF AMERICA, INC.	498897700	OIL PRESSURE ADAPTER SET	Used for measuring the secondary pressure and line pressure.
Courtesy of SUBARU OF AMERICA, INC.	499267300	STOPPER PIN	Used for adjusting the inhibitor switch.
Courtesy of SUBARU OF AMERICA, INC.	499277100	BUSHING 1-2 INSTALLER	Used for installing the side bearing inner race of the front differential. Used for removing and installing the transfer reduction drive gear. Used for installing the ball bearing of the transfer reduction drive gear. Used for installing drive pinion retainer oil seal. Used for installing the ball bearing of the transfer reduction driven gear.
Courtesy of SUBARU OF AMERICA, INC.	499277200	INSTALLER	Used for installing the taper roller bearing inner race of drive pinion. Used for installing the reduction driven gear.
Courtesy of SUBARU OF AMERICA, INC.	499575400	GAUGE	Used for measuring the height of end play.
Courtesy of SUBARU OF AMERICA, INC.	499575600	GAUGE	Used for measuring the height of forward clutch. Used for measuring the height of end play.
Courtesy of SUBARU OF AMERICA, INC.	499737100	PULLER SET	Used for measuring the height of forward clutch. NOTE: Use the rack only. Used for measuring the transfer end play. NOTE: Use the rack only.
Courtesy of SUBARU OF AMERICA, INC.	499755602	PRESS SNAP RING	Used for installing the ball bearing and roller bearing of the transmission case. Used for installing the drive sprocket ball bearing. Used for installing the ball bearing of the converter case cover.
Courtesy of SUBARU OF AMERICA, INC.	499757002	INSTALLER	Used for installing the bearing of front reduction driven gear.
Courtesy of SUBARU OF AMERICA, INC.	499787700	WRENCH	Used for measuring backlash.
Courtesy of SUBARU OF AMERICA, INC.	899864100	REMOVER	Used for removing and installing the ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	899904100	STRAIGHT PIN REMOVER	Used for removing and installing the straight pin.
Courtesy of SUBARU OF AMERICA, INC.	927720000	HOUSING BUSHING INSTALLER AND REMOVER	Used for installing the oil seal of the oil pump chain cover. NOTE: Use BASE TUBE LATERAL LINK (927890000) and BUSHING SHAFT (927880000).
Courtesy of SUBARU OF AMERICA, INC.	18270KA020	SOCKET (E20)	Used for removing and installing the drive pinion retainer.
Courtesy of SUBARU OF AMERICA, INC.	18270AA040	SOCKET	Used for installing the transfer clutch pressure test plug.
Courtesy of SUBARU OF AMERICA, INC.	18460AA040	CHECK BOARD	Used for measuring TCM terminal voltage and resistance.
Courtesy of SUBARU OF AMERICA, INC.	18621AA000	ADAPTER WRENCH	Used for removing and installing the drive pinion.
Courtesy of SUBARU OF AMERICA, INC.	18632AA000	TRANSMISSION STAND	Used for disassembling and assembling the transmission assembly.
Courtesy of SUBARU OF AMERICA, INC. 1	18651AA000	INSTALLER	Used for installing the bearing of front reduction drive gear.
Courtesy of SUBARU OF AMERICA, INC.	18657AA010	INSTALLER	Used for installing the oil seal of inhibitor switch.
Courtesy of SUBARU OF AMERICA, INC.	18657AA020	OIL SEAL INSTALLER	Used for installing drive pinion retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	18658AA020	WRENCH COMPL RETAINER	Used for removing and installing the differential side retainer.
Courtesy of SUBARU OF AMERICA, INC.	18667AA010	HOLDER	Used for removing and installing the drive pinion. Used as a holder to rotate gear when checking tooth contact.
Courtesy of SUBARU OF AMERICA, INC.	18675AA000	DIFFERENTIAL SIDE OIL SEAL INSTALLER	Used for installing the differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	18681AA000	PRESSURE GAUGE ADAPTER	Used for measuring the secondary pressure and transfer clutch pressure. NOTE: Use the genuine O-ring (part No. 806911080) for installation.
Courtesy of SUBARU OF AMERICA, INC.	18681AA010	PRESSURE GAUGE ADAPTER	Used for measuring line pressure. NOTE: Use the genuine O-ring (part No. 806916050) for installation.
Courtesy of SUBARU OF AMERICA, INC.	18720AA000	REMOVER	Used for removing ball bearing of reduction driven gear.
Courtesy of SUBARU OF AMERICA, INC.	18760AA000	CLAW	Used for removing ball bearing of front reduction driven gear. Used together with PULLER ASSY (398527700).
Courtesy of SUBARU OF AMERICA, INC.	18762AA001	COMPRESSOR SPECIAL TOOL	Used for disassembling and installing the multi-plate clutch piston for shifting. COMPRESSOR SPECIAL TOOL (18762AA000) can also be used.
Courtesy of SUBARU OF AMERICA, INC.	18763AA000	COMPRESSOR SHAFT	Used for disassembling and installing the multi-plate clutch for shifting.
Courtesy of SUBARU OF AMERICA, INC.	18765AA000	COMPRESSOR SUPPORT	Used for disassembling and installing the multi-plate clutch for shifting.
Courtesy of SUBARU OF AMERICA, INC.	18767AA000	BEARING REMOVER	Used for removing the transfer reduction drive gear. Used for removing the reduction driven gear bearing retainer.
Courtesy of SUBARU OF AMERICA, INC.	18769AA020	EXPANDER PULLEY	Used for removing and installing the secondary pulley assembly.
Courtesy of SUBARU OF AMERICA, INC.	18801AA000	OIL PRESSURE GAUGE ASSY	Used for measuring the secondary pressure and line pressure.
Courtesy of SUBARU OF AMERICA, INC.	20299AG010	BASE	Used for installing the roller bearing on primary pulley side.
Courtesy of SUBARU OF AMERICA, INC.	28399SA010	OIL SEAL PROTECTOR	Used for installing the front drive shaft. (For oil seal protection)
Courtesy of SUBARU OF AMERICA, INC.	34099AC010	ADAPTER HOSE A	Used for measuring the transfer clutch pressure.
Courtesy of SUBARU OF AMERICA, INC.	34099AC020	ADAPTER HOSE B	Used for measuring the transfer clutch pressure. NOTE: Use the genuine union screw (Part No. 801914010) and gasket (Part No. 803914060) for installation.
Courtesy of SUBARU OF AMERICA, INC.	41099AC000	ENGINE SUPPORT ASSY	Used for engine angle adjustment.
Courtesy of SUBARU OF AMERICA, INC.	73099SG000	SPECIAL TOOL CONDENSER	Used for installing the transfer clutch pressure test plug.
Courtesy of SUBARU OF AMERICA, INC.	-	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures, refer to "Help" of application.