LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Secondary Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Speed Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of secondary speed sensor, replace it with a new part.
  1. Install the secondary speed sensor using a new O-ring.
    CAUTION:
    • Before installing O-rings, apply sufficient amount of CVTF to avoid damage and deformation.
    • Use SUBARU genuine CVTF.
    • Be careful not to incorrectly install or fail to install O-rings and other such parts.

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.7 ft-lb)

  2. Connect the secondary speed sensor harness connector.
  3. Install the transmission case cover No. 1.

    Tightening torque: 

    8 N.m (0.8 kgf-m, 5.9 ft-lb)

  4. Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals