Select Cable: Inspection

Check the removed select cable, and replace or adjust it if there is any damage, rust or malfunction.

1. Check that the inner cable moves smoothly without drag.
2. Check the inner cable for damage and rust.
3. Check the outer cable for damage, bends and cracks.
4. Check the boot for damage, cracks and deterioration.
5. Shift the select lever from "P" range to "D" range. Check the existence of feel to contact the detents in each range. If the detents cannot be felt or the position pointer is improperly aligned, adjust the select cable.
6. Check that the starter rotates when the select lever is set to "P" or "N" range.
7. Check the back-up light illumination when the select lever is in "R" range.
8. Check the shift lock operation when the select lever is in "P" range.