Filler Pipe (FA20): Installation

1. Open the fuel filler lid.
2. Insert the filler pipe from inside of the rear fender.

   Courtesy of SUBARU OF AMERICA, INC.

3. Align the cutout of the filler pipe protector with the protrusion of the neck holder. Insert the filler pipe protector all the way down and turn in the direction of the arrow to lock.

   Courtesy of SUBARU OF AMERICA, INC.

4. Install the filler pipe to the vehicle.

   Standard value: T=7.5 Nm {77 kgfcm} {5.5 ft-lb} 

   Courtesy of SUBARU OF AMERICA, INC.

5. Connect the fuel tank to filler pipe hose (A) and vent hose (B) to the filler pipe, and connect the quick connector of drain tube (C).

   Standard value: T=2.0 Nm {20 kgfcm} {1.5 ft-lb} 

1. Install the rear mud guard RH with clips.

Standard value: T=6.0 Nm {61 kgfcm} {4.4 ftlb}