LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Filler Pipe (FA20) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Filler Pipe (FA20): Removal

  1. Fuel spill prevention procedure (Refer to FUEL SYSTEM (FA20) )
  2. Draining of fuel (Refer to REMOVAL )
  3. Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
  4. Removal of fuel filler cap
    1. Open the fuel filler lid, and remove the fuel filler cap.
      G10213554Courtesy of SUBARU OF AMERICA, INC.
    2. Turn the fuel filler pipe protector in the direction of the arrow to unlock and remove it.
  5. Removal of rear suspension member SUB-ASSY (Refer to REMOVAL )
  6. Removal of rear mud guard RH
    1. Remove the clip to remove the rear mud guard RH.
  7. Removal of filler pipe
    G10213555Courtesy of SUBARU OF AMERICA, INC.
    1. Disconnect the fuel tank to filler pipe hose (A) and vent hose (B) from the filler pipe, and disconnect the quick connector of drain tube (C).
      G10213556Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the bolts and nuts securing the filler pipe to the body.
    3. Remove the filler pipe from underside of the vehicle.
scientia non olet · About LEMON Manuals