Injector ASSY (FA20/Direct Fuel Injection): Removal
- Intake manifold removal (Refer to REMOVAL )
- Fuel delivery pipe NO. 2 removal
- Remove the fuel delivery pipe NO. 2.
CAUTION: When removing the fuel delivery pipe NO. 2, ull it straight out so that the seal surface of fuel delivery pipe LH is not damaged. - Fuel delivery pipe removal
- Fuel delivery pipe (bank 2 side) removal
- Fuel delivery pipe (bank 1 side) removal
- Fuel injector ASSY removal
- Remove the fuel injector ASSY from the fuel delivery pipes (bank 2 side) and (bank 1 side).CAUTION:
- If the tip of fuel injector ASSY is bumped or dropped, replace the fuel injector ASSY with a new one.
- When removing the injector, pull it straight out so that the seal surfaces of fuel delivery pipes (bank 2 side) and (bank 1 side) are not damaged.
- Identify the removed fuel injector ASSY with a tag etc. marked with the cylinder number.
- Remove the fuel injector holder from the fuel injector ASSY.
- Remove the C-ring and fuel injector insulator.
- Remove the back-up ring NO. 1.
- Remove the fuel injector seal and back-up ring NO. 2.
- Remove the fuel injector ASSY from the fuel delivery pipes (bank 2 side) and (bank 1 side).
- Fuel injector seal removal
- Hold the fuel injector seal and widen it a little.
CAUTION:
- Be careful not to hold the fuel injector seal too strongly in order to protect the injector groove from scratches.
- If the tip of fuel injector ASSY is bumped or dropped, replace the fuel injector ASSY with a new one.