LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Except For HEV) >> Fuel Insulator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Insulator: Installation

  1. Install the fuel pipe insulator.
    CAUTION:
    • If substantial amount of fuel or parts cleaner come into contact with the fuel pipe insulator, replace it with a new part.
    • If only small amount of fuel comes into contact with the fuel pipe insulator, wait for the fuel to evaporate before installing it.
  2. Install the intake manifold assembly. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>INTAKE MANIFOLD ASSEMBLY>INSTALLATION .
  3. Install the air intake boot. Refer to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE BOOT>INSTALLATION .
  4. Connect the ground terminal to 12V engine restart battery sensor. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals