LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) >> Air Intake Boot >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Air Intake Boot: Installation

  1. Connect the PCV hose and set the air intake boot.
  2. Install the clips, and tighten the clamps.
    NOTE: Align the clamp hole with the protrusion of the air intake boot.
    G13590551Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: 

    3 N.m (0.3 kgf-m, 2.2 ft-lb)

  3. Install the collector cover.

    Refer to INTAKE (INDUCTION) (H4DO)>COLLECTOR COVER>INSTALLATION .

scientia non olet · About LEMON Manuals