LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) >> Collector Cover >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Collector Cover: Removal

  1. Remove the collector cover in the order shown in the figure.
    CAUTION: The operation must be carefully performed; otherwise the collector cover may be damaged.
    NOTE: Check the cushion (a) and cushion (b) for disengagement or peel-off.
    G13224189Courtesy of SUBARU OF AMERICA, INC.
    1. Pull up the collector cover at portion (A) and pull out the protrusion at the collector cover backside from the cushion (B).
    2. Slide the collector cover to the vehicle front to remove the collector cover from collector cover bracket (C).
      G13224190Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the collector cover bracket.
    NOTE: Perform this procedure only when required.
    G13224191Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals