LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Front Arm >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Arm: Removal

  1. Lift up the vehicle, and then remove the front wheels.
  2. Remove the under cover front, Refer to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  3. Remove the crossmember support rear. Refer to FRONT SUSPENSION>CROSSMEMBER SUPPORT>REMOVAL .
  4. Remove the arm COMPL front.
    CAUTION: Be careful not to damage the boot of the ball joint.
    1. Remove the bolt from the front axle housing.
    2. Lower the arm COMPL front, and remove the ball joint portion from the front axle housing.
      G13224963Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the front arm rear plate.
      G12400579Courtesy of SUBARU OF AMERICA, INC.
    4. Remove the arm COMPL front.
      G12400580Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals