LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> AT Learning >> Procedure >> Preparation For Learning
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation For Learning

  1. Warm up or cool down until [ATF Temp.] displayed on the Subaru Select Monitor is 40 - 65°C (104 - 149°F).
  2. After stopping the vehicle, shift the select lever to "P range".
  3. Apply the parking brake.
  4. Lift up the vehicle.
    CAUTION: While working, be sure to keep the lower edge of the tires 0.3 m (0.98 ft) or more above the ground as vehicle will vibrate.
  5. Connect the Subaru Select Monitor.
  6. Turn the ignition switch to ON.
  7. Turn off all systems causing an electrical load, such as headlights, A/C, seat heater and rear defogger, etc.
scientia non olet · About LEMON Manuals