LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Secondary Pressure Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Pressure Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of secondary pressure sensor, replace it with a new part.
  1. Install the secondary pressure sensor using a new O-ring, and connect the connector.
    NOTE: Apply CVTF to the O-rings.

    Tightening torque: 

    39 N.m (4.0 kgf-m, 28.8 ft-lb)

  2. Install the front exhaust pipe. Refer to EXHAUST (H4DO)>FRONT EXHAUST PIPE>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  4. Check the CVTF level. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>CVTF>INSPECTION .
scientia non olet · About LEMON Manuals