LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Transfer Clutch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Clutch: Installation

  1. Install the thrust bearing.
    NOTE: Make sure to install in the right direction.
    G10218706Courtesy of SUBARU OF AMERICA, INC.
  2. Install the transfer clutch.
    G08317898Courtesy of SUBARU OF AMERICA, INC.
  3. Select the transfer driven gear shim.
  4. Remove the transfer clutch from the extension case.
  5. Attach the selected transfer driven gear shim to extension case with Vaseline.
  6. Install a new seal ring to the transfer clutch.
    NOTE: Apply CVTF to the seal rings.
  7. Install a new seal ring to the transfer driven gear.
    NOTE: Apply CVTF to the seal rings.
  8. Install the transfer clutch.
  9. Install the extension case. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>EXTENSION CASE>INSTALLATION .
  10. Install the electric oil pump. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>ELECTRIC FLUID PUMP>INSTALLATION .
  11. Install the transmission body. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals