LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Manifold Absolute Pressure Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure Sensor: Installation

  1. Using a new O-ring, install the manifold absolute pressure sensor.

    Tightening torque: 

    3.4 N.m (0.3 kgf-m, 2.5 ft-lb)

  2. Connect the connector.
  3. Install the collector cover.

    Refer to INTAKE (INDUCTION) (H4DO)>COLLECTOR COVER>INSTALLATION .

  4. Connect the ground terminal to battery sensor.

    Refer to REPAIR CONTENTS>NOTE>BATTERY .

scientia non olet · About LEMON Manuals