LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Engine Coolant Temperature Sensor >> Removal >> Inlet Engine Coolant Temperature Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inlet Engine Coolant Temperature Sensor

  1. Disconnect the ground terminal from battery sensor.

    Refer to REPAIR CONTENTS>NOTE>BATTERY .

  2. Drain engine coolant.

    Refer to COOLING(H4DO)>ENGINE COOLANT>REPLACEMENT>DRAINING OF ENGINE COOLANT .

  3. Remove the front exhaust pipe.

    Refer to EXHAUST(H4DO)>FRONT EXHAUST PIPE>REMOVAL .

  4. Disconnect the connector (A) and disconnect the connector (B) from the chain cover.
  5. Remove the bolt (C) securing the harness stay, and remove the inlet engine coolant temperature sensor.
    G13223941Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the inlet engine coolant temperature sensor from the harness stay.
    CAUTION: Do not remove the inlet engine coolant temperature sensor harness from the harness stay unless replacing the inlet engine coolant temperature sensor.
scientia non olet · About LEMON Manuals