LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Touring >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Fuel Insulator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Insulator: Installation

  1. Install the fuel pipe insulator.
    CAUTION:
    • If substantial amount of fuel or parts cleaner come into contact with the fuel pipe insulator, replace it with a new fuel pipe insulator.
    • If only small amount of fuel comes into contact with the fuel pipe insulator, wait for the fuel to evaporate before installing it.
  2. Secure the engine wiring harness with the bolts.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  3. Connect the connector to the outlet engine coolant temperature sensor.
  4. Install the intake manifold assembly.

    Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>INTAKE MANIFOLD ASSEMBLY>INSTALLATION .

  5. Install the air intake boot.

    Refer to INTAKE (INDUCTION) (H4DO)>AIR INTAKE BOOT>INSTALLATION .

  6. Install the collector cover.

    Refer to INTAKE (INDUCTION) (H4DO)>COLLECTOR COVER>INSTALLATION .

  7. Connect the ground terminal to battery sensor.

    Refer to REPAIR CONTENTS>NOTE>BATTERY .

scientia non olet · About LEMON Manuals