LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Keyless Entry Control Module >> Installation >> Sedan Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sedan Model

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Install the keyless entry control module.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the trim panel assembly rear shelf. Refer to EXTERIOR/INTERIOR TRIM>Rear Shelf Trim>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  4. When the keyless entry control module is replaced, register the transmitter ID. (Model with TPMS): Refer to TIRE PRESSURE MONITOR (DIAGNOSTICS)>Register Transmitter (ID)>OPERATION .
scientia non olet · About LEMON Manuals