Front Suspension System And Wheel Alignment: Stabilizer: Installation: Stabilizer
- Set the stabilizer front to the vehicle in the reverse order of removal, and install the clamp stabilizer.
Tightening torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Install the stabilizer link front (bottom part).
Tightening torque:
60 N.m (6.1 kgf-m, 44.3 ft-lb)
- Install the front exhaust pipe. (H4DO model) Refer to Exhaust (H4DO)>Front Exhaust Pipe>Installation .
- Install the center exhaust pipe (rear). (H4DOTC model) Refer to Exhaust (H4DOTC)>Center Exhaust Pipe>Installation>Center Exhaust Pipe (Rear) .
- Install the under guard front. (H4DOTC model)
Tightening torque:
32 N.m (3.3 kgf-m, 23.6 ft-lb)
- Install the under cover front. Refer to Exterior/Interior Trim>Front Under Cover>Installation .