Inspection Mode 1
| DTC | Description & trouble part | Note |
|---|---|---|
| B2B00 | Driver's Door Power Window Auto Switch Stuck | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Window (Driver)]. Refer to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Refer to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Using the driver's side power window switch, operate the automatic up/down feature and check that the window rolls up and down.
- Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Refer to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.