Inspection Mode 5
| DTC | Description & trouble part | Note |
|---|---|---|
| B2B10 | Passenger's Door Power Window Driver's Door Auto Switch Stuck | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Window (Driver)]. Refer to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Refer to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Using the automatic up and down feature of the driver's side main switch and check that the window operates automatically.
- Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Refer to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.