LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Rear Regulator and Motor Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Regulator and Motor Assembly: Installation

  1. Install the regulator and motor assembly rear.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the glass assembly rear door. Refer to GLASS/WINDOW/MIRRORS>Rear Door Glass>INSTALLATION .
  3. Install the rear sealing cover. Refer to EXTERIOR BODY PANELS>Sealing Cover>INSTALLATION>REAR SEALING COVER .
  4. Install the trim panel rear door. Refer to EXTERIOR/INTERIOR TRIM>Door Trim>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals