LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Diagnostics) >> Warning Light Illumination Pattern >> AVH On Indicator Light Do Not Come On
April 5, 2026: LEMON Manuals is launched! Read the announcement.

AVH On Indicator Light Do Not Come On

Detecting condition: 

Trouble symptom: 

When the ignition switch is turned to ON, the AVH ON indicator light does not illuminate even when the AVH switch (center information display) is operated.

  1. CHECK AVH SWITCH (CENTER INFORMATION DISPLAY)  .

    Check the AVH switch (center information display). Refer to COCKPIT CONTROL (DIAGNOSTICS)>Basic Diagnostic Procedure .

    Is the check result OK?

    Yes  : Go to  2.

    No  : Replace the cockpit control module. Refer to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY .

  2. CHECK COMBINATION METER  .

    Check the combination meter. Refer to COMBINATION METER (DIAGNOSTICS)>Basic Diagnostic Procedure .

    Is the check result OK?

    Yes  : Replace the VDCCM&H/U. Refer to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM&H/U) .

    No  : Replace the combination meter. Refer to INSTRUMENTATION/DRIVER INFO>COMBINATION METER .