Outlet Engine Coolant Temperature Sensor
- Place a new gasket and install the outlet engine coolant temperature sensor using the ST.NOTE: STRUT MOUNT SOCKET (20099PA000) can also be used.
Preparation tool:
ST: STRUT MOUNT SOCKET (20399AG000)
Tightening torque:
16 N.m (1.6 kgf-m, 11.8 ft-lb)
- Connect the connector.
- Install the generator. Refer to STARTING/CHARGING SYSTEMS (H4DO)>Generator>INSTALLATION .
- Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
- Fill engine coolant. Refer to COOLING (H4DO)>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT .