0A CAN Communication Failure
Detecting condition:
When CAN communication error is detected while the EyeSight system automatically stops the vehicle and during Auto Start Stop operation.
Trouble symptom:
Buzzer sounds and the Auto Start Stop is canceled.
- CHECK DTC
.
Read the DTC of [Auto Start Stop] using the Subaru Select Monitor. Refer to AUTO START STOP (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .
Are any DTCs displayed?
Yes : Perform the diagnosis according to the DTC. Refer to AUTO START STOP (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .
No : Perform the diagnosis for LAN system. Refer to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .